Basic VTP Configuration (Instructor Version)

Topology Diagram 

Addressing Table

Device (Hostname)	Interface	IP Address	Subnet Mask	Default Gateway
S1	VLAN 99	172.17.99.11	255.255.255.0	N/A
S2	VLAN 99	172.17.99.12	255.255.255.0	N/A
S3	VLAN 99	172.17.99.13	255.255.255.0	N/A
PC1	NIC	172.17.10.21	255.255.255.0	172.17.10.1
PC2	NIC	172.17.20.22	255.255.255.0	172.17.20.1
PC3	NIC	172.17.30.23	255.255.255.0	172.17.30.1
PC4	NIC	172.17.10.24	255.255.255.0	172.17.10.1
PC5	NIC	172.17.20.25	255.255.255.0	172.17.20.1
PC6	NIC	172.17.30.26	255.255.255.0	172.17.30.1

Port Assignments (Switches 2 and 3)

Read more »

CCNA Exploration2: Routing Protocols and Concepts – Chapter 7 Exam

01.

Refer to the exhibit. If all routers are running RIP version 2, why is there no route for the 192.168.1.32/27 network?

• Rip version 2 does not send subnet masks in its updates.
• Router A is not setup with RIP as a routing protocol.
• Rip version 2 will auto summarize routes by default.
• Router B is not setup to advertise the 192.168.1.64/30 network.

Read more »

CCNA Exploration2: Routing Protocols and Concepts – Chapter 6 Exam

01. What two advantages does CIDR provide to a network? (Choose two.)

reduced routing table size

dynamic address assignment

automatic route redistribution

reduced routing update traffic

automatic summarization at classful boundaries

Read more »

CCNA Exploration2: Routing Protocols and Concepts – Chapter 5 Exam

 01.

Refer to the exhibit. All routers in the exhibit are running RIP v1. The network administrator issues the show ip route command on router A. What routes would appear in the routing table output if the network is converged? (Choose two).

• R 192.168.2.0/24 [120/1]
• C 192.168.2.0/24 [120/1]
• R 10.10.3.0/24 [120/0]
• C 10.10.3.0/24 [120/1]
• R 10.10.1.0/24 [120/2]
• R 10.10.1.0/24 [120/3]

Read more »

CCNA Exploration2: Routing Protocols and Concepts – Chapter 4 Exam

01. Which event will cause a triggered update?

• an update routing timer expires
• a corrupt update message is received
• a route is installed in the routing table
• the network is converged
  

Read more »

CCNA Exploration2: Routing Protocols –Chapter 3 Exam

01. Which two statements correctly describe the concepts of administrative distance and metric? (Choose two.)

• Administrative distance refers to the trustworthiness of a particular route.
• A router first installs routes with higher administrative distances.
• The value of the administarive distance can not be altered by the network administrator.
• Routes with the smallest metric to a destination indicate the best path.
• The metric is always determined based on hop count.
• The metric varies depending which Layer 3 protocol is being routed, such as IP or IPX.

Read more »

CCNA Exploration2: Routing Protocols –Chapter 2 Exam

01. The output of the Router# show interfaces serial 0/1 command displays the following: Serial0/1 is up, line protocol is down.
What is the most likely cause for the line protocol being down?

• Serial0/1 is shutdown.
• There is no cable connecting the routers.
• The remote router is using serial 0/0.
• No clock rate has been set.

Read more »

CCNA Exploration2: Routing Protocols –Chapter 1 Exam 100% common

01. Which two statements correctly describe the components of a router? (Choose two.)

• RAM permanently stores the configuration file used during the boot sequence.
• ROM contains diagnostics executed on hardware modules.
• NVRAM stores a backup copy of the IOS used during the boot sequence.
• Flash memory does not lose its contents during a reboot.
• ROM contains the most current and most complete version of the IOS.
• Flash contains boot system commands to identify the location of the IOS.

Read more »

CCNA Exploration 1: Network Fundamentals – Final exam (it's 85% common)

01. When connectionless protocols are implemented at the lower layers of the OSI model, what is usually used to acknowledge that the data was received and to request the retransmission of missing data?

• IP
• UDP
• Ethernet
• a connectionless acknowledgement
• an upper-layer, connection-oriented protocol or service

Read more »

CCNA Exploration 1: Network Fundamentals – Chapter 11 Exam

01. Immediately after a router completes its boot sequence, the network administrator wants to check the routers configuration. From privileged EXEC mode, which of the following commands can the administrator use for this purpose? (Choose two.)

• show flash
• show NVRAM
• show startup-config
• show running-config
• show version

Read more »

CCNA Exploration 1: Network Fundamentals – Chapter 10 Exam

1. 

Refer to the exhibit. A student working in the lab selects a cable that is wired as shown. Which connection types can successfully be made with this cable? (Choose two.)

• connecting a PC to a router’s console port
• connecting two routers together via their fast ethernet ports
• connecting two switches together at gigabit speeds
• connecting a PC to a switch at Gigabit Ethernet speeds
• connecting two devices with the same interface type at Fast Ethernet speeds

Read more »

CCNA Exploration 1: Network Fundamentals – Chapter 9 Exam

01. Convert the binary number 10111010 into its hexadecimal equivalent. Select the correct answer from the list below.

• 85
• 90
• BA
• A1
• B3
• 1C

Read more »

CCNA Exploration 1: Network Fundamentals – Chapter 8 Exam 100% common in 2010

01. Which OSI layer is responsible for binary transmission, cable specification, and physical aspects of network communication?

• Presentation
• Transport
• Data Link
• Physical

Read more »

CCNA Exploration 1: Network Fundamentals – Chapter 7 Exam 100% common

01. Which three factors should be considered when implementing a Layer 2 protocol in a network? (Choose three.)

• the Layer 3 protocol selected
• the geographic scope of the network
• the PDU defined by the transport layer
• the physical layer implementation
• the number of hosts to be interconnected
  

Read more »

CCNA Exploration 1: Network Fundamentals – Chapter 6 Exam 99% common

01.

Refer to the exhibit. Which network prefix will implement the IP addressing scheme for the LANs shown in the graphic?

• /24
• /16
• /20
• /27
• /25
• /28

Read more »

CCNA Exploration: Network Fundamentals – Chapter 5 Exam 100% common

01. In an IPv4 environment, what information is used by the router to forward data packets from one interface of a router to another?

• destination network address
• source network address
• source MAC address
• well known port destination address

Read more »

CCNA Exploration: Network Fundamentals – Chapter 4 Exam

01.

Based on the transport layer header shown in the diagram, which of the following statements describe the established session? (Choose two.)

• This is a UDP header.
• This contains a Telnet request.
• This contains a TFTP data transfer.
• The return packet from this remote host will have an Acknowledgement Number of 43693.
• This is a TCP header.
  

Read more »

CCNA Exploration: Network Fundamentals – Chapter 3 Exam

01. What application layer protocol is commonly used to support for file transfers between a client and a server?

• HTML
• HTTP
• FTP
• Telnet

Read more »

CCNA Exploration: Network Fundamentals – Chapter 2 Exam

01. Which statements correctly identify the role of intermediary devices in the network? (Choose three.)

• determine pathways for data
• initiate data communications
• retime and retransmit data signals
• originate the flow of data
• manage data flows
• final termination point for data flow

Read more »