CCNA Exploration2: Routing Protocols and Concepts – Final Exam

01. 

Refer to the exhibit.
R1 knows two routes, Path A and Path B, to the Ethernet network attached to R3. R1 learned Path A to network 10.2.0.0/16 from a static route and Path B to network 10.2.0.0/16 from EIGRP. Which route will R1 install in its routing table?

• Both routes are installed and load balancing occurs across both paths.
• The route via Path B is installed because the EIGRP route has the best metric to network 10.2.0.0/16.
• The route via Path A is installed because the static route has the best metric to network 10.2.0.0/16.
• The route via Path B is installed because the EIGRP route has the lowest administrative distance to network 10.2.0.0/16.
• The route via Path A is installed because the static route has the lowest administrative distance to network 10.2.0.0/16.

Read more »

CCNA Exploration2: Routing Protocols and Concepts – Chapter 11 Exam

01. 

Refer to the exhibit. What does the “O*E2″ from the “O*E2 0.0.0.0/0 [110/1] via 192.168.1.1, 00:05:34, Serial0/0″ line represent?

• an internal type 2 OSPF route.
• an external OSPF route at least two hops away.
• an external OSPF route from two different sources.
• an external OSPF route that will not increment in cost.
• a default route.
• The route was distributed into OSPF from a type 2 router.
  

Read more »

CCNA Exploration2: Routing Protocols and Concepts – Chapter 10 Exam

01. 

Refer to the exhibit. When Router D is configured to use a link-state routing protocol and is added to the network, what is the first thing that it does to begin learning the network topology?

• It sends LSP packets to Routers B and C.
• It sends LSP packets to all routers in the network.
• It sends Hello packets to all routers in the network.
• It sends information about its directly connected neighbors to Routers A and E.
• It sends information about its directly connected neighbors to all routers in the network.
• It learns about its directly connected networks when its interfaces reach the up state.

Read more »

CCNA Exploration2: Routing Protocols and Concepts–Chapter9 Exam

01. On a router running EIGRP, what database would maintain a list of feasible successors?

• routing table
• neighbor table
• topology table
• adjacency table

Read more »

CCNA Exploration2: Routing Protocols and Concepts – Chapter 8 Exam

01.

Refer to the exhibit. What can be determined from this output?

• The router will have to perform recursive lookups to forward a packet destined for 192.168.2.213/24.
• The parent route for these networks was removed from the routing table.
• A route to 192.168.0.0/25 would be classified as a supernet route for the routes listed in the routing table.
• All of the routes listed are network routes.

Read more »

CCNA Exploration 1: Network Fundamentals – Final exam (it's 85% common)

01. When connectionless protocols are implemented at the lower layers of the OSI model, what is usually used to acknowledge that the data was received and to request the retransmission of missing data?

• IP
• UDP
• Ethernet
• a connectionless acknowledgement
• an upper-layer, connection-oriented protocol or service

Read more »

CCNA Exploration 1: Network Fundamentals – Chapter 11 Exam

01. Immediately after a router completes its boot sequence, the network administrator wants to check the routers configuration. From privileged EXEC mode, which of the following commands can the administrator use for this purpose? (Choose two.)

• show flash
• show NVRAM
• show startup-config
• show running-config
• show version

Read more »

CCNA Exploration 1: Network Fundamentals – Chapter 10 Exam

1. 

Refer to the exhibit. A student working in the lab selects a cable that is wired as shown. Which connection types can successfully be made with this cable? (Choose two.)

• connecting a PC to a router’s console port
• connecting two routers together via their fast ethernet ports
• connecting two switches together at gigabit speeds
• connecting a PC to a switch at Gigabit Ethernet speeds
• connecting two devices with the same interface type at Fast Ethernet speeds

Read more »

CCNA Exploration 1: Network Fundamentals – Chapter 9 Exam

01. Convert the binary number 10111010 into its hexadecimal equivalent. Select the correct answer from the list below.

• 85
• 90
• BA
• A1
• B3
• 1C

Read more »

CCNA Exploration 1: Network Fundamentals – Chapter 8 Exam 100% common in 2010

01. Which OSI layer is responsible for binary transmission, cable specification, and physical aspects of network communication?

• Presentation
• Transport
• Data Link
• Physical

Read more »

CCNA Exploration 1: Network Fundamentals – Chapter 7 Exam 100% common

01. Which three factors should be considered when implementing a Layer 2 protocol in a network? (Choose three.)

• the Layer 3 protocol selected
• the geographic scope of the network
• the PDU defined by the transport layer
• the physical layer implementation
• the number of hosts to be interconnected
  

Read more »

CCNA Exploration 1: Network Fundamentals – Chapter 6 Exam 99% common

01.

Refer to the exhibit. Which network prefix will implement the IP addressing scheme for the LANs shown in the graphic?

• /24
• /16
• /20
• /27
• /25
• /28

Read more »

CCNA Exploration: Network Fundamentals – Chapter 5 Exam 100% common

01. In an IPv4 environment, what information is used by the router to forward data packets from one interface of a router to another?

• destination network address
• source network address
• source MAC address
• well known port destination address

Read more »

CCNA Exploration: Network Fundamentals – Chapter 4 Exam

01.

Based on the transport layer header shown in the diagram, which of the following statements describe the established session? (Choose two.)

• This is a UDP header.
• This contains a Telnet request.
• This contains a TFTP data transfer.
• The return packet from this remote host will have an Acknowledgement Number of 43693.
• This is a TCP header.
  

Read more »

CCNA Exploration: Network Fundamentals – Chapter 3 Exam

01. What application layer protocol is commonly used to support for file transfers between a client and a server?

• HTML
• HTTP
• FTP
• Telnet

Read more »

CCNA Exploration: Network Fundamentals – Chapter 2 Exam

01. Which statements correctly identify the role of intermediary devices in the network? (Choose three.)

• determine pathways for data
• initiate data communications
• retime and retransmit data signals
• originate the flow of data
• manage data flows
• final termination point for data flow

Read more »